R-Log. N. 8 analog and N. 4 digital inputs by terminal block

LSI LASTEM designs and manufactures a wide range of data loggers for environmental applications. With very low power consumption, expanded signal capacity and protections against severe environmental conditions, LSI LASTEM data loggers are the ideal solution for measurements in meteorological, air quality, indoor and outdoor environmental monitoring applications.

The different features of LSI LASTEM instruments suits virtually any environmental monitoring procedure, guaranteeing accurate and reliable monitoring of physical parameters both for portable and continuous application, outdoors and indoors. 

R-Log data logger is a line of compact data loggers for environmental monitoring, suitable for portable indoor applications, but also fixed for continuous monitoring. R-Log can be connected to a wide range of LSI LASTEM's sensor. R-Log can receive measurements via radio from radio sensors, or from other R-Log units in order to create a wireless sensor network. Small and flexible, but also powerful and reliable, R-log is used in multi-measurement (different parameters) and multi-point (different measurement points) applications.

Highlights

  • N. 4/8/16 analog inputs, N 1/4 digital input;
  • 2.4 GHz Zig-Bee radio to receive measurements from radio sensors and other R-Log modules;
  • Auto-recognition of connected sensors;
  • Extremely low power consumption and integrated batteries;
  • N. 50/99 measurements between channels for sensor acquisition and derived quantities;
  • Internal library for calculating derived quantities and mathematical calculations;
  • 8 MB Flash memory;
  • Digital outputs to implement external devices with programmable logics or events;
  • Sensors acquisition rate from 1 s to 12 h;
  • Statistic elaboration rate from 1 s to 12 h; 
  • Connection to the PC via RS232 (USB/Ethernet with external accessories);
  • Display and keyboard.
R-Log is used in indoor applications where medium-long term monitoring is required using an easily transportable and installable system. Typically each R-Log module is mounted on a tripod together with a series of sensors. Applications where R-Log is typically used are HVAC tests of buildings, where the user wants to run a campaign to measure thermal quantities on various points simultaneously with a duration from a few hours to several days. 

Radio networks


R-Log, when configured as Master, receives measurements via radio from the configured Slave and Repeater units. In this case R-Log Master stores all the measurements of the network. From a PC it is sufficient to connect only to the Master instrument in order to use all the data. The radio used is Zig-Bee type at 2.4 GHz (Tx 10 mV), this type of radio uses a free frequency everywhere. The distance covered is 300 m (line of sight).

Sensors acquisition rate

Acquisition rate is programmable for each input (from1 s to 12 h).
  • ELR510.1/515.1: manages channels from analog inputs and 8 derived quantities in 1 s;
  • ELO515.1: manages 12 channels from analog sensors and 8 derived quantities in 1 s.
To limit energy consumption from sensors requiring power supply, it is possible to set an advaced power supply from the acquisition event (warm-up), that is interruped immediately after the acquisition itself.

Data elaboration


The raw measured values can be stored directly as instantaneous values, or be stored as statistical processing (n. 1 base from 1 s to 12 h):
  • Average, minimum, maximum, standard deviation;
  • Wind elaborations;
  • Totals.

Derived and calculated quantities


Internal library of derived environmental quantities. These calculations use acquired quantities, constant values and other calculated quantities. The library also includes mathematical funztions.
  • ELR510.1/515.1: manages up to 50 channels between acquired, derived and calculated qualtities;
  • ELO515.1: manages up to 99 channels between acquired, derived and calculated qualtities.

Data memory


Internal memory (8 MB) allows to store data typically for several weeks. The registration structure is circular,. In models with MiniDIN inputs (ELR510.1) the data stored in "surveys" with progressive numbering and data/time start/end.

Data communication


It is possible to transfer data to a PC via RS232, USB (with adapert included), or via Ethernet through an external converter. R-Log units can be connected to a wide range of sensors fon environmental quantities, as:
  • Air temperature and Relative Humidity;
  • Black globe temperature;
  • Wet temperature;
  • Surface and materials temperatures; 
  • Air speed;
  • Light;
  • Pollutance (IAQ);
  • Thermal flow and Radiant asymmetry;
  • Meteorological quantities.
LSI LASTEM supplies a wide range of compatible sensors, read the LSI LASTEM's catalogue. Having terminal input, usinge ELR515.1, ELO515.1 nodels, it is possible to use third-parties sensors.
 


Input numb.

N. 8 analog differential (N. 16 single ended), n. 4 digital (ON/OFF frequency/counter)

  • N. 2 input for sensors with optoelectronics (freq. max 10 kHz);
  • N. 2 frequency input (freq. max 5 kHz)
  • N. 4 logic state input ON/OFF (they acquire signals 0-3 V)
Inputs typeTerminal block
Numb. channels  99
Sensors auto-recognizingNO
Switched power supply outputsYES (N. 7)
Backlit displayNO
Threaded slot for tripod fixing NO
Internal batteryNO
Plug for power battery charger YES 
Included accessoriesRS232/USB adapter, RS232 cable,  DIN-bar mounting
Dimensions 242 x 108 x 80 mm 
Weight  720 g
Code: ELO515.1
ELO305_FB_001