';

Masts

H 2÷3 meter masts for sensors and data logger installation

These masts are suitable for ground, concrete plinth or wall installation. It can be useful for the installation of meteorological equipment (sensors, ELF box for data logger) and solar panels.

All masts are equipped with grounding electric protection. When the mast is fixed on the ground, by a DYA021 tripod, it is always better to use tie-rods.

When the DYA020 tripod is used on a concrete plinth, it is possible to use tie rods, expe-cially when the mast is three meters high.

Masts

Highlights

Use

Support for wind sensors, other sensors mounted on arms and data logger

Diameter

Ext. 50 mm int. 47 mm

Material

Stainless steel AISI304

Fixing surface

On ground, concrete plinth, wall (see ACCESSORIES)

Masts

Accessories

Basements for masts Ø 50 mm

  • DYA020 – Tripod for masts Ø 50 mm concrete plinth installation
  • DYA020.1 – Set of N.3 anchoring bolts, Ø 12mm for fixing tripods DYA020 on cement plinth
  • DYA021 – Tripod for masts Ø 50 mm ground installation

Picchetti per basi fissate a terreno

  • DYA023 – Set of n. 3 pickets for DYA021

Foldable system for masts Ø 50 mm

  • DYA019 – Joint (it should be used with tie-rods set)

Collar for jointing two masts

  • DYA002 – collar for jointing two masts Ø 50 mm (it should be used with tie-rods set)

Arm for masts installation on wall

  • DYA004 – Arm for mast Ø 50 mm wall installation (it should be used with tie-rod set)

Tie-ros set for mast Ø 50 mm

  • DYA028 – Set of 3 tie-rods and collar for fixing H 2-3 m pole
  • DYA026 – Sets of N.3 pickets for tie-rod fixing on the ground

Masts

Available Models

palo 2m

H 2 m masts

Code: DYA006.1

Weight: 3,8 Kg
Materials: Stainless steel AISI304
For sensors, data logger installation and solar panel.
palo 3m

H 3 m masts

Code: DYA010.1

Weight: 5,5 Kg
Materials: Stainless steel AISI304
For sensors, data logger installation and solar panel.
documents LSI Lastem

Masts

Documents

  • This document is not available for download, please contact our Sales Department

  • This document is not available for download, please contact our Sales Department