';

Towers for meteo stations

Towers and telescopic towers

These towers for meteo sensors are used where meteorological sensors should be mounted ten meters from the ground. All models are equipped with accessories for fixing to the ground or to a concrete plinth.

Towers

Available Models

Torri per sensori towers for meteo sensors

Tower 10 m

Code: DYA318

This tower is used where meteorological sensors should be mounted ten meter from the ground. The tower is equipped with accessory to be fixed directly on the ground or on concrete plinth. This equipment is very light and handy. The tower comes divided in three sections of 3 m each, on top there is a Ø 50 mm pole. Tower pull down is made using a hinge placed on its base.
  • Used to install wind sensors at a height of 10 m
  • Lite structure in zinc plated iron
  • Easy to install and pull it up&down
  • Concrete plinth or ground installation
  • N.3 Tie-rods included
  • DYA320 - Mobile base for DYA318, ground installation
  • DYA323 - Set of N.4 pickets for DYA320 base
  • DYA026 - Set of N.3 pickets for tie rods
  • DYA020.1 - Set of N.3 anchoring bolt for DYA318 base
  • DYA026 - Set of N.3 pickets for tie rods
Torri per sensori towers for meteo sensors

Telescopic tower 10 m

Code: MAPOA4101

Used when wind sensors should be mounted ten meter from the ground. The tower is equipped with accessory to be fixed directly on the ground and it is also secured by stain-less steel tie-rods (see Accessories). The structure is very light and handy. The telescopic tower has five sections, when closed its height is 3,5 m. On top there is a Ø 50 mm pole. For extension and reduction, the tower is equipped with a manual winch placed on its base.
  • Used to install wind sensors at a height of 10 m
  • Lite structure in stainless steel
  • Erectable and foldable by means of a manual winch
  • Handy telescopic tower
  • MAPOA9102 - Tie-rods and accessories for pole mod. MAPOA4101
  • MAPOA9103 - Ground anchoring set for pole mod. MAPOA4101
  • MAPOA9104 - Wooden case for packaging of pole mod. MAPOA4101
documents LSI Lastem

Towers

Documenti

  • This document is not available for download, please contact our Sales Department