';

Air temperature and relative humidity

Thermohygrometers for any type of environmental application

Wide range of precise and reliable sensors designed for continuous meteorological measurements even in severe climatic conditions and in the presence of strong thermal and hygrometric variations. Temperature measurement principle RTD Pt100 1/3 DIN B (Class AA EN60751) and capacitive humidity.

Air temperature and relative humidity

Available Models

Air temperature and Relative Humidity

Analogue, digital, radio outputs

Thermohygrometer designed for severe climatic weather conditions with anti-radiation screen.
Models available with an effective natural ventilation anti-radiation screen that ensures the protection of the sensitive element from solar radiation to ensure the accuracy of the temperature reading. For best results in the case of low wind speeds and high levels of solar radiation, some models are equipped with a forced ventilation screen.
  • 4 ÷ 20 mA, RS485-Modbus RTU, Radio output versions;
  • Forced ventilation radiant screen available;
  • Replaceable sensitive element;
  • Programmable air temperature measurement range.
Termoigrometro a ventilazione naturale - Uscita analogica, RS485, radio

Radio output

Thermohygrometer with natural ventilation radiant screen, 868 MHz Radio output
Code: EXP815
termoigrometro modello 05

RS485 output

Thermohygrometer with natural ventilation radiant screen. RS485 output.
Code: DMA975
temperatura e umidità relativa aria - DMA867

2x0/4 ÷ 20 mA output

Thermohygrometer with forced ventilation radiant screen, 2x0/4 ÷ 20 mA output 10 ÷ 30 Vac/dc
Code: DMA867
Air temperature and Relative Humidity

2x0/4 ÷ 20 mA output

Thermohygrometer with natural ventilation radiant screen, 2x0/4 ÷ 20 mA output
Code: DMA875
temperatura aria uscita diretta 01

Direct signal output

Thermohygrometer designed for conditions of strong thermal and hygrometric variations.
Accurate and reliable, these sensors are suitable for continuous meteorological measurements even in severe climatic conditions and in the presence of strong thermal and hygrometric variations. These sensors must be housed in an antiradiant shield with natural or forced ventilation. Models with Pt100 output for temperature and 0 ÷ 1 Vdc for relative humidity output 0 ÷ 1 Vdc for both temperature and relative humidity are available. A model is available that is designed for continuous conditions of high temperature and relative humidity typical of tropical climates.
  • Design and performances addessed to meteorological applcations;
  • Fast return after saturation;
  • High protection from salty and polluted air;
  • High efficiency radiant screen;
  • Optional forced ventilation radiant screen;
  • ISO17025 traceability.
temperatura aria uscita diretta 01

0 ÷ 1 Vdc Pt100 - Male connector

Sensor to measure air Temperature and Relative Humidity in meteorological applications wheen protected by the radiant screen
Code: DMA672.5
temperatura aria uscita diretta 01

UART Output

Sensor to measure air Temperature and Relative Humidity in meteorological applications wheen protected by the radiant screen
Code: DMA672.4
temperatura aria uscita diretta 01

Free wire cable - 0 ÷ 1 Vdc output Pt100

Sensor to measure air Temperature and Relative Humidity in meteorological applications wheen protected by the radiant screen.
Code: DMA672.1
temperatura aria uscita diretta 01

Free wires - 2 x 0 ÷ 1 Vdc output

Temperature and Relative Humidity sensor for severe meterological applications.
Code: DMA672.3
documents LSI Lastem

Air temperature and relative humidity

Documents

Data Sheet

Manual

Schematic Drawing

CE

  • This document is not available for download, please contact our Sales Department

logo