Weather Masts
H 2รท3 meter masts for sensors and data logger installation
These weather masts are suitable for ground, concrete plinth or wall installation. It can be useful for the installation of meteorological equipment (sensors, ELF box for data logger) and solar panels.
All masts are equipped with grounding electric protection.
When the mast is fixed on the ground, by a DYA021 tripod, it is always better to use tie-rods. When the DYA020 tripod is used on a concrete plinth, it is possible to use tie rods, expe-cially when the mast is three meters high.
Weather Masts
H 2รท3 meter masts for sensors and data logger installation
These weather masts are suitable for ground, concrete plinth or wall installation. It can be useful for the installation of meteorological equipment (sensors, ELF box for data logger) and solar panels.
All masts are equipped with grounding electric protection.
When the mast is fixed on the ground, by a DYA021 tripod, it is always better to use tie-rods. When the DYA020 tripod is used on a concrete plinth, it is possible to use tie rods, expe-cially when the mast is three meters high.
H 2รท3 meter masts for sensors and data logger installation
These weather masts are suitable for ground, concrete plinth or wall installation. It can be useful for the installation of meteorological equipment (sensors, ELF box for data logger) and solar panels.
All masts are equipped with grounding electric protection.
When the mast is fixed on the ground, by a DYA021 tripod, it is always better to use tie-rods. When the DYA020 tripod is used on a concrete plinth, it is possible to use tie rods, expe-cially when the mast is three meters high.
Masts
Highlights
Use
Support for wind sensors, other sensors mounted on arms and data logger.
Diameter
Ext. 50 mm int. 47 mm.
Material
Stainless steel AISI304
Fixing surface
On ground, concrete plinth, wall (see ACCESSORIES)
Model codes: DYA006.1, DYA010.1.
Accessories
Basements for masts ร 50 mm
- DYA020 โ Tripod for masts ร 50 mm concrete plinth installation;
- DYA020.1 โ Set of N.3 anchoring bolts, ร 12mm for fixing tripods DYA020 on cement plinth;
- DYA021 โ Tripod for masts ร 50 mm ground installation.
Pegs for bases fixed to the ground
- DYA023 โ Set of n. 3 pickets for DYA021 and DYA021.1.
Foldable system for masts ร 50 mm
- DYA019 โ Joint (it should be used with tie-rods set)
Collar for jointing two masts
- DYA002 โ Collar for jointing two masts ร 50 mm (it should be used with tie-rods set).
Arm for masts installation on wall
- DYA004 โ Arm for mast ร 50 mm wall installation (it should be used with tie-rod set).
Tie-ros set for mast ร 50 mm
- DYA028 โ Set of 3 tie-rods and collar for fixing H 2-3 m pole;
- DYA028.1 โ Set of N.3 tie-rods and collar for anchoring tie-rods for 4-6 m poles to the ground.
- DYA026 โ Sets of N.3 pickets for tie-rod fixing on the ground.
Documents
This document is not available for download, please contact ourย Sales Department
This document is not available for download, please contact ourย Sales Department
Description
Masts
Highlights
Use
Support for wind sensors, other sensors mounted on arms and data logger.
Diameter
Ext. 50 mm int. 47 mm.
Material
Stainless steel AISI304
Fixing surface
On ground, concrete plinth, wall (see ACCESSORIES)
Model codes: DYA006.1, DYA010.1.
Accessories
Basements for masts ร 50 mm
- DYA020 โ Tripod for masts ร 50 mm concrete plinth installation;
- DYA020.1 โ Set of N.3 anchoring bolts, ร 12mm for fixing tripods DYA020 on cement plinth;
- DYA021 โ Tripod for masts ร 50 mm ground installation.
Pegs for bases fixed to the ground
- DYA023 โ Set of n. 3 pickets for DYA021 and DYA021.1.
Foldable system for masts ร 50 mm
- DYA019 โ Joint (it should be used with tie-rods set)
Collar for jointing two masts
- DYA002 โ Collar for jointing two masts ร 50 mm (it should be used with tie-rods set).
Arm for masts installation on wall
- DYA004 โ Arm for mast ร 50 mm wall installation (it should be used with tie-rod set).
Tie-ros set for mast ร 50 mm
- DYA028 โ Set of 3 tie-rods and collar for fixing H 2-3 m pole;
- DYA028.1 โ Set of N.3 tie-rods and collar for anchoring tie-rods for 4-6 m poles to the ground.
- DYA026 โ Sets of N.3 pickets for tie-rod fixing on the ground.
Reviews
There are no reviews yet.